Recruiter

Terry Parris Associates

Salary

From £50,000 to £51,000 per year

Location

West Sussex

Job term

Permanent

Job hours

Full time

Regulatory Affairs – Perm - £50k
Our client is expanding and opening new premises in the Sussex area and they are looking for a Senior Regulatory/Compliance Affairs Engineer. To be successful in this role you must be able to take ownership of all approvals for all our client products worldwide, new and existing.

Experience Required:
• Experienced in Regulatory Affairs
• Experience in dealing with regulatory authorities in the EU, USA, Russia, China and Japan
• Ideally you will have worked on FDA510k applications and Pre Market Authorisations, as well as understanding the process for CE marking, sFDA, and the Shonin
• Good leadership skills are beneficial as you will have a junior regulatory engineer in house reporting to you
• Experience in medical equipment and is familiar with IEC60601-1 and EMC testing requirements

This is an excellent opportunity for the right candidate and we recommend you apply today to avoid disappointment.

Please apply though the link and we will contact you to discuss the role before your details are submitted.

Terry Parris Associates are recruitment consultants whom value the needs of their clients and candidates. We are always happy to discuss vacancies, so if you are interested in this or any other position we have please give us a call.

Recruiter

Premier Technical Recruitment

Salary

Competitive

Location

Gloucestershire

Job term

Permanent

Job hours

Full time

Our client have been established for almost 50 years and specialise in the manufacture of bespoke special purpose machinery for supply to a range of industry sectors on a global basis. As a result of continued success and a planned program of strategic growth, they are now seeking to recruit an articulate, dynamic and self motivated Production Assistant and Coordinator to complement their established and successful team.

Reporting to the Technical Director, the successful candidate will be tasked with the organisation and coordination of parts and production resources in order to ensure that agreed production targets are achieved on both a monthly and annual basis.

You will assist in reviewing master production schedules and works orders and effectively prioritise for specific customer requirements, and will revise schedules according to the capabilities of workers, parts, materials, machines and equipment, and will be responsible for issuing parts lists, scheduling deliveries, supplier liaison and operating the stock control system, so effective communication and organisational skills are essential for the position.

In addition to the development of master production plans, you will raise and issue internal works orders, parts lists and drawings to ensure targets are achieved, and will work closely with in house technical teams to ensure that both electrical schematic and mechanical design drawing are available when required. You will also develop and maintain the computerised stock control system / MRP to ensure that parts and materials are available as required.

You will be responsible for scheduling the delivery of bought-in parts to the agreed timeframe and will compile associated costing reports throughout the manufacturing process, liaising with customers to inform them of delivery updates whilst being committed to a continuous manufacturing improvement ethos that supports the clients’ product design philosophy.

To be considered for this varied and challenging position, you will demonstrate at least 2 years experience of practical production engineering experience and will possess a relevant engineering qualification in production control. Familiarity with SAGE (or equivalent) MRP packages will be distinctly advantageous.

This is an exceptional opportunity for a suitably enthusiastic, organised and capable Production professional to develop their career within a stable and progressive environment, so if you feel you have the relevant skills and experience and are looking for your next step up the career ladder, then contact the Production Team at Premier Technical Recruitment on [contact details removed] or email your cv in the strictest confidence to [contact details removed] for further details.

Recruiter

Premier Technical Recruitment

Salary

Competitive

Location

Birmingham

Job term

Permanent

Job hours

Full time

Our client is a globally renowned blue chip manufacturing organisation allied to the automotive sector. As a result of continued success they are now seeking to recruit a number of highest calibre Cost Estimators and Costing Engineers to complement their established and extremely successful team committed to providing robust financial information and expert strategic insight.

Working in a team with a global focus, you’ll develop valuable knowledge of automotive parts and processes and will essentially demonstrate a range of relevant manufacturing process knowledge, with technical awareness at both the production process and cost driver level, and with previous project management experience proving distinctly advantageous.

As a Cost Engineer, you’ll focus on a specific vehicle commodity - from Exterior to Interior, through Power Train, Chassis, and Electrical, and will be responsible for delivering ‘should cost’ estimates for a specific sub-set of parts, supporting the Purchase team in their negotiations with suppliers, working closely with Design Engineers as a business advisor and identifying and supporting the implementation of opportunities to reduce costs. Additionally you will influence relevant programs and commodity directions and support cross-functional, cross-brand and supplier charge outs.

To be considered for these varied and challenging positions, you will ideally be qualified to degree level and / or have a relevant Engineering / Manufacturing qualification, with experience in a major tier1 automotive supplier again distinctly advantageous. Excellent communication skills alongwith flexibility to travel are vital for the role, as is a proven ability to think on your feet and make appropriate decisions.

In return, you’ll benefit from a committed program of career development, with genuine opportunities to further your career in a world-class Finance team through roles across the breadth of the business. Aside from an attractive remuneration package, successful candidates will enjoy access to a privilege car purchase scheme, membership of a competitive pension plan, performance related bonus scheme and 26 days holiday entitlement plus statutory days.

Contact the Manufacturing Team at Premier Technical Recruitment on [contact details removed] or email your cv in the strictest confidence to [contact details removed] for further details.

Recruiter

Premier Technical Recruitment

Salary

Competitive

Location

Somerset

Job term

Permanent

Job hours

Full time

MANUFACTURING ENGINEER OFFLINE PROGRAMMING (Inspection)
Somerset to £40k plus benefits

Our client is a world renowned aerospace organisation with an enviable reputation in the development of innovative highest technology solutions to the military aerospace sector. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced and highly capable Manufacturing Engineer to complement their established Machine Shop team.


The successful candidate will be responsible for providing support to the Manufacturing Engineering department on CMM Offline / Online programming for various aspects of Casing, Prismatic and safety critical rotor part manufacture, as well as providing offline Calypso CMM programs for Casings and Rotor Head components from Catia models and drawings and providing associated support paperwork for the inspection process including bench inspection and converting existing Umess programs to the Calypso format.


Additionally you will liaise extensively with the Manufacturing and Design teams on an offline workstation and provide Calypso CMM programs for first off and full inspection requirements. You will define the CMM fixture and probe requirements for each job and create detailed set up sheets for each new component. You will also provide FAIRS (First Article Inspection Reports) and ICS (Inspection Check Sheets) to support the component manufacture, and maintain existing Calypso programs using the Seiki System.


To be considered for the challenging and varied role, you will demonstrate a comprehensive understanding of manufacturing processes (machining processes for turning, milling, grinding etc) and be fully conversant in the interpretation of engineering and manufacturing drawings. Essentially, experience of Calypso software (programming and job running) and hands on experience of both offline and online CMM programming are required for the role.


Additionally, you will ideally have experience in the use of Catia V5 and an understanding of FAIRS and ICS documentation and be familiar with DMFG (Digital Manufacturing Processes) and ASME Y14.43 Dimensioning and Tolerancing.



Contact the Aerospace Team at Premier Technical Recruitment on [contact details removed] or email your cv in the strictest confidence to [contact details removed] for further details.

Recruiter

Premier Technical Recruitment

Salary

Competitive

Location

Birmingham

Job term

Permanent

Job hours

Full time

Our client is a globally renowned blue chip manufacturing organisation allied to the automotive sector. As a result of continued success they are now seeking to recruit a number of highest calibre Cost Estimators and Costing Engineers to complement their established and extremely successful team committed to providing robust financial information and expert strategic insight.

Working in a team with a global focus, you’ll develop valuable knowledge of automotive parts and processes and will essentially demonstrate a range of relevant manufacturing process knowledge, with technical awareness at both the production process and cost driver level, and with previous project management experience proving distinctly advantageous.

As a Cost Engineer, you’ll focus on a specific vehicle commodity - from Exterior to Interior, through Power Train, Chassis, and Electrical, and will be responsible for delivering ‘should cost’ estimates for a specific sub-set of parts, supporting the Purchase team in their negotiations with suppliers, working closely with Design Engineers as a business advisor and identifying and supporting the implementation of opportunities to reduce costs. Additionally you will influence relevant programs and commodity directions and support cross-functional, cross-brand and supplier charge outs.

To be considered for these varied and challenging positions, you will ideally be qualified to degree level and / or have a relevant Engineering / Manufacturing qualification, with experience in a major tier1 automotive supplier again distinctly advantageous. Excellent communication skills alongwith flexibility to travel are vital for the role, as is a proven ability to think on your feet and make appropriate decisions.

In return, you’ll benefit from a committed program of career development, with genuine opportunities to further your career in a world-class Finance team through roles across the breadth of the business. Aside from an attractive remuneration package, successful candidates will enjoy access to a privilege car purchase scheme, membership of a competitive pension plan, performance related bonus scheme and 26 days holiday entitlement plus statutory days.

Contact the Manufacturing Team at Premier Technical Recruitment on [contact details removed] or email your cv in the strictest confidence to [contact details removed] for further details.

Recruiter

Solos Consultants

Salary

From £25,000 to £33,000 per year

Location

Nottingham

Job term

Permanent

Job hours

Full time

My client is looking for several maintenance engineers with either a Electircal or Mechanical Bias to provide maintenance to a wide range of planned and breakdown maintenance on a variety of continuous production machinery including conveyors, packaging, plc's, hydraulics and pneumatics.

Open to Industry background, however preference will be given to those with FMCG industry knowledge.

Qualifications Needed:
Electrical Engineers must have 17th Wiring Regs
City and Guilds, ONC/HNC or Higher or NVQ Level 3
Preference given to hands on maintenance of FMCG equipment

Will suit electrical maintenance engineers located in Nottinghamshire

You may have experience of the following: Maintenance Engineer, Preventive Maintenance, Siemens S7, Maintenance Technician, Mechanical Engineering, Electrical Engineering, Fast Moving Consumer Goods, FMCG, Maintenance Electrician, Multi Skilled Maintenance, Multi Skilled Electrical, Multi Skilled Mechanical, Electrical Fitter, Mechanical fitter, Manufacturing Technician, Maintenance Craftsmen, Electrical Technician, Mechanical Technician, Shift Engineer, Maintenance Fitter.

Recruiter

Solos Consultants

Salary

From £25,000 to £33,000 per year

Location

Derby

Job term

Permanent

Job hours

Full time

My client is looking for several maintenance engineers with either a Electircal or Mechanical Bias to provide maintenance to a wide range of planned and breakdown maintenance on a variety of continuous production machinery including conveyors, packaging, plc's, hydraulics and pneumatics.

Open to Industry background, however preference will be given to those with FMCG industry knowledge.

Qualifications Needed:
Electrical Engineers must have 17th Wiring Regs
City and Guilds, ONC/HNC or Higher or NVQ Level 3
Preference given to hands on maintenance of FMCG equipment

Will suit electrical maintenance engineers located in Derbyshire

You may have experience of the following: Maintenance Engineer, Preventive Maintenance, Siemens S7, Maintenance Technician, Mechanical Engineering, Electrical Engineering, Fast Moving Consumer Goods, FMCG, Maintenance Electrician, Multi Skilled Maintenance, Multi Skilled Electrical, Multi Skilled Mechanical, Electrical Fitter, Mechanical fitter, Manufacturing Technician, Maintenance Craftsmen, Electrical Technician, Mechanical Technician, Shift Engineer, Maintenance Fitter.

Recruiter

Terry Parris Associates

Salary

From £38,000 to £43,000 per year

Location

West Sussex

Job term

Permanent

Job hours

Full time

Senior Electronic Design Engineer
An excellent opportunity has arisen for a Senior Electronic Design Engineer to work in our clients Product Development Department.

The role will be to provide electronic hardware design covering the entire lifecycle of product design including requirements and design specifications, system design, circuit design, evaluation and selection of components and modules, prototyping and testing, validation against international performance and safety standards, documentation, transfer to production and support of mature products. The role will involve working closely with the mechanical design group and experience of mechatronics/electromechanical systems would be advantageous.

Essential skills, knowledge and qualifications
• A systems approach to design supported by strong analytical skills
• Thorough understanding of digital, analogue and microprocessor hardware design
• Design for EMC compliance
• Component selection, specification and qualification
• Experience of RFID, power management, module interconnection/wiring loom design
servomotor control and power electronics would be advantageous
• Design to cost and design for manufacture
• Good communication skills, both oral and written
• At least 10 years relevant experience
• Degree in Electrical/Electronic Engineering or similar

Desirable skills and knowledge
• Experience of R&D in a medical product environment
• Experience of working in a highly regulated industry, ideally medical
• Familiarity with medical industry standards such as BS EN 60601, BS EN 61010
• Familiarity with designing for UL approval
• Embedded software design

To apply, please go through the link and we will call you to discuss the role before your details are submitted.

Terry Parris Associates are recruitment consultants whom value the needs of their clients and candidates. We are always happy to discuss vacancies, so if you are interested in this or any other position we have please give us a call.

Recruiter

Vector Recruitment Ltd.

Salary

Competitive

Location

Didcot

Job term

Permanent

Job hours

Full time

A small high technology company who are enjoying a new period of strong growth and financial success are looking for an experienced Purchasing Manager. The role requires an experienced individual who has real hands on experience in a similar role and can immediately have a real impact on the business.



This is a new role with a growing company. The Purchasing Manager will work closely with the Engineering Manager on all aspects of the manufacturing operation including defining, developing and implementing new processes, procedures and controls. You will take charge of all aspects of purchasing/procurement including supply chain/supplier management, import/export and shipping.



Purchasing Manager Specification



Essential

1 Hands on management experience of purchasing in a manufacturing operation requiring large numbers of specialised electronic/mechanical components.
2 Flexible, willing and able to operate happily in a rapidly changing environment.



Highly Desirable

1 Good working knowledge of a Sage package
2 Good Project Management skills.
3 Experience of high tech electronics manufacturing
4 Procurement of electronics and electro-optic components from international suppliers
5 Actual implementation of a new MRP computer package, ideally Sage 50 Manufacturing.
6 Implementation of change in a purchasing function, rather than just “maintaining the status quo”
7 Membership of the Chartered Institute of Purchasing and Supply –desirable but not essential.



Purchasing Manager Package

Competitive Salary with benefits, including; Pension (Company 6%, Individual 3%) BUPA & Death in Service x4 Salary