Recruiter

Orion Electrotech

Salary

Competitive

Location

Middlesex

Job term

Permanent

Job hours

Full time

Production Engineer

Middlesex

£30-35,000
Benefits: 25 days holiday plus bank holiday
Company Sick pay
Pension
Discounted memberships - gym & breakdown cover
& additional benefits

Company: Leading electro/mechanical design, development and manufacturing organisation operating within a secure market sector and offering good long term development opportunities.

This is a varied mechanical role in support of both New Product introduction (NPI) and existing products with key accountability for:
NPI support
Continuous Improvement
Jigs / fixture design

This will encompass:
Working with design on new product projects to ensure designs are produced in the most cost effective and efficient way (involving organisation of design, specification and procurement of any necessary tooling)
Identification of product design improvements to reduce cost, ease assembly and improve quality and reliability.
Investigate and implement new processes and carry out improvements to existing processes in order to reduce costs and variability and improve process yields.
Provide written specifications, procedures and instructions to assist operational staff to assemble, process and test products effectively and efficiently.
Provide Shop Floor Support resolve problems with processes and product designs.
Create/amend BOMs and Routings using company MRP system.
Raise/action Change Notes as required.
Advise and assist with design of New Products to ensure suitability for manufacture.
Comply with the company’s health and safety policy.
Undertake any other tasks that may be reasonably requested

The ideal candidate will be a HNC / Apprentice trained Mechanical / Production Engineer with a background in a precision mechanical assembly environment ideally also including clean room. Tooling / jig / fixture design. Knowledge of metal joining processes, brazing,TIG / laser welding ideally sought. Continuous improvement / lean manufacturing / six sigma highly advantageous i.e. FMEA, Poke Yoke, DOE etc

Likely to suit individuals with a background as (but not limited to) Mechanical Production Engineering, Tooling Engineer or similar
Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

From £30 to £40 per hour

Location

Warwickshire

Job term

Contract

Job hours

Full time

Simulation / Process Engineer
Contract - Ongoing
West Midlands

£Negotiable
Working within this prestigious design, development and manufacturing organisation an opportunity exists for an experienced Engineer to provide Process Engineering / Simulation support to the Project team.

Working on a project basis the Process Engineer’s role will be to support the project Manager in defining detailed processes based on customer drawings / specification
Key accountabilities will include:
Providing detailed analysis and design of assembly processes
Identification and recommending alternative processes or best practice to optimize processes
Shop floor layouts
Utilizing your knowledge of the latest manufacturing technologies and practice to impact of process design
Analysis of product changes and impact to process
Undertake FMEA’s as required
Work with the R&D department / sales to enable most cost effective processes the development of new assembly processes
Lean manufacturing input
The ideal candidate will be an experienced Process Engineer with prior experience of mechanical assembly processes. HND+ / degree qualified in an engineering discipline with the ability to demonstrate all round problem solving skills. Experience of RobCAD / eM packages required. Knowledge of Lean / 6 Sigma initiatives highly advantageous.
Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

Competitive

Location

Hampshire

Job term

Permanent

Job hours

Full time

QUALITY ASSURANCE ENGINEER
Hampshire
Circa £34-40k basic
Benefits:
Early finish Friday
25 days holiday (rising)
Pension
Life assurance
Share scheme
Bonus

We are a global design, development and manufacturer with a secure order book and on-going investment into product development. We are currently seeking an experience Quality Assurance Engineer to report to board level who will provide support across production and business operations with a focus on product quality, quality investigations and quality system maintenance.
This is an exciting position offering the opportunity to impact on both product robustness from initial design stage through to ensuring on-going optimisation of existing products and processes as well as ensure adherence to industry quality standards.
Key accountabilities for Quality Engineer will include:
Key role in development projects and supporting NPI from a quality assurance perspective
Undertake internal and external audits.
Advanced Quality Planning
Utilising your knowledge of lean tools to undertake root cause analysis and implement corrective and preventative actions for parts, sub-assemblies and finished products
Assist in any defect investigations including the documentation of corrective actions relevant to product or process failures.
Liaison with Customers in relation to project quality requirements
Developing and improving documentation and systems within the company
Hosting customers/regulatory representatives during audits
Co-ordinate and Prepare First Article Inspection Reports

The ideal candidate will be an experienced HNC/D / Degree qualified or similar Quality Engineer within an electro-mechanical or related manufacturing environment. Knowledge of ISO9001:2008, AS9100, EASA and First Article requirements and PPAP’s highly advantageous, together with knowledge of statistical quality tools / methods such as SPC.

In return you will be rewarded with a varied, senior opportunity with a progressive manufacturing environment.


Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

Competitive

Location

Bedfordshire

Job term

Permanent

Job hours

Full time

Supply Chain Manager
Bedfordshire
Circa £70 k package comprising:
£45-55k basic
20% bonus + Car allowance + PHC +++

We are a world leading manufacturer of high quality products supplying a global market. We have experienced considerable growth over the last two years and as a result of this growth and investment we are currently seeking a Supply Chain Manager to undertake a key role in the business.

The role will be responsible for supporting the company’s buying and commercial activity through developing commodity strategies, careful supplier selection, performance monitoring, maintaining supplier agreements and order books, monitoring inventory and providing accurate costing data to the business. This role has a particular emphasis on driving the team towards successful tactical execution of demand, with on-time delivery being a key measure. Strategic initiatives are also a focus given the seniority of the role.

Key accountabilities will include:

Managing and co-ordinating the activities of the tactical supply chain team, in order to fulfil overall business goals relating to quality, on-time delivery, customer satisfaction and margin improvement.
Providing timely and accurate supplier delivery status to ensure compliance with customer need dates and all other demand.
Developing and executing robust, efficient and effective documented business processes that support the strategy.
Working with global Purchasing functions, and participating in monthly, quarterly and annual budgetary and planning processes.
Executing purchasing strategies that encompass supplier reduction and Low Cost Country sourcing
On-going development of the business ERP system.

Taking appropriate action across the business unit to ensure that professional purchasing ethics and practices are being maintained and that business objectives are not being compromised.
The successful candidate will be an experienced Supply Chain / Purchasing Manager with proven direct manufacturing purchasing expertise. Degree level qualification in an engineering / technical subject and CIPS qualified. Mechanical / electro-mechanical commodity expertise and experience of low cost country sourcing essential. Good knowledge of MRP/ERP systems and reports, proven track record of achievement in a relevant position and the ability to lead and manage strategic and tactical procurement teams essential.

Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

Competitive

Location

Hertfordshire

Job term

Permanent

Job hours

Full time

MANUFACTURING ENGINEER

HERTFORDSHIRE

To£43,000 package, comprising c £35-40k + BONUS + Pension + Holiday ++

We are a market leading design, development & manufacturing organisation with a global supply base. Due to product development and streamlining we are currently seeking an experienced Manufacturing Engineer to undertake a varied, autonomous role in support of production and supplier development.
The Manufacturing Engineer’s role will be diverse and span full support of in house production and also providing manufacturing guidance to suppliers to ensure accurate quality products are delivered. Key accountabilities for Manufacturing Engineer will include:
New product introduction
Streamlining existing products and processes and feeding back to design to improve product quality
Process development / continuous improvement
Assist with supplier audits and identify gaps in the documentation used with suppliers and implement corrective actions for problems
Work with suppliers to identify areas for design improvement utilising lean manufacturing tools such as Poke Yoke
Work with engineering and supply chain to manage and control engineering change

The ideal candidate will be HNC/D + qualified Manufacturing / Production Engineer with a number of years proven experience in a mechanical / electro-mechanical manufacturing environment. Excellent problem solving skills essential as are first class communication skills. An understanding of lean manufacturing techniques highly advantageous.
Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

Competitive

Location

Bedfordshire

Job term

Permanent

Job hours

Full time

Senior Process Engineer
New Products & Process Development

Bedfordshire

Circa £38-44,000 basic

Benefits:
Bonus - Excellent
Pension
Holiday


The company : Established yet growing world leading mechanical / electro-mechanical manufacturer supplying defence and commercial markets.

Due to our continued growth and product development we are now seeking to appoint a talented Senior Process Engineer to be based at our manufacturing facility, but with overseas travel to global sites to support project requirements.

This is a rare opportunity to become involved in the early stages in the development of a brand new production line supporting a volume product portfolio.

The role will be heavily NPI biased with key accountability for:

Working with design on new product projects to ensure designs are produced in the most cost effective and efficient way (DFM)
Ensure adequate measures are in place to ensure the new production system is controlled inline with customer requirements and there is sufficient resource / man power etc
Responsible for creating and refining processes for the manufacture of new products. This will encompass development of automation, specification and justification of new equipment, early development support etc
Ensure all new product are Designed for Manufacture
Complete Process FMEAs for all future processes incorporating Poke Yoke in the product, equipment or tooling
Implement new documented procedures to improve the corrective actions required post process failure


The ideal candidate will be an degree qualified Production Engineer / Manufacturing Engineer with a proven background in NPI and process development / optimisation within a mechanical / electro-mechanical manufacturing environment. Experience within the following areas:
• Managing suppliers and 'Turnkey Vendors' of high value capital equipment.
• Experience of delivering high value capital projects on time and to cost.
• Introduction of new products into new manufacturing processes including rate readiness validation and sign-off.
• Specification and implementation of lean manufacturing processes utilising world class best practices.
• Experience of automated and semi-automated equipment, processes and related controls.
• Integration of new manufacturing processes
• Implementation of processes into manufacturing execution systems.

Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

From £33,000 to £40,000 per year

Location

Buckinghamshire

Job term

Permanent

Job hours

Full time

Senior Production Engineer

Location – Buckinghamshire

Salary – To £40k basic

Benefits 25 days holiday (+ bank Holidays)
Pension
Private Health Care

To support their increasing product portfolio and consistent order book, this leading manufacturing organisation are looking to appoint a Senior Production Engineer at their lean manufacturing facility.

The role will suit a Production Engineer with an electro-mechanical / assembly bias.

Acting as a Senior member of a team of like-minded engineers you will have primary responsibility for new product introductions and optimisation of existing products and processes at both the UK and also at an overseas manufacturing facility.

Key responsibilities will include:

 New Product Project work - Input throughout the design process to ensure ease of manufacture (DFM), design and specification of appropriate tooling, ensuring facilities are available to meet volume ramp up and streamlining components to minimise costs
 Lead / drive lean manufacturing techniques proactively to develop a culture of continuous process improvement.
 Investigate and validate new materials to improve production processes and reduce costs
 Act as technical lead where appropriate
 Continuous improvement of processes and designs to enable both manufacturing and procurement to make or purchase parts more efficiently and cost effectively without adversely effecting final product quality.
And other related duties

The ideal candidate will be a HNC/D or Degree qualified Production Engineer (or related discipline) with several years experience of supporting manufacture within a electro-mechanical / assembly production environment The ability to read and interpret BOM and mechanical drawings and write clear and concise assembly instructions, design and build assembly and test fixtures is essential. A working knowledge of continuous improvement / lean issues highly desirable.

Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

From £45,000 to £55,000 per year

Location

Buckinghamshire

Job term

Permanent

Job hours

Full time

PRODUCTION MANAGER

BUCKS

To circa £60k package comprising
£45-50k basic
Car, Bonus (10%), Private Health, Excellent Pension Scheme

We are an established design, development and manufacturer, committed to on-going investment to remain leaders in our field. As a result of continued growth we are seeking results driven Production Manager to undertake a pivotal role within the business.

There will be considerable focus for the Production Manager on Lean / Continuous Improvement, quality and delivery of results, so will suit a driven individual who enjoys managing change and driving strategic and tactical initiatives across production .

Utilising your electro-mechanical assembly Production Management expertise you will be responsible for:
Day to day management of the UK Production team (Production, Quality & Stores) and also overseeing a growing production plant in China encompassing budgetary & resource management and planning and work flow control
Ensuring on time delivery of products to customer
Managing the introduction of new products into manufacture
Ensuring the production engineering team support the manufacturing and quality control departments to ensure they are operating in the most effective way to drive out potential quality issues and identifying on-going improvements in products and processes
This is a highly autonomous role with considerable opportunity to make an impact on production operations. There will be an element of travel to china involved so the willingness to travel will be essential.

The ideal candidate will be HND / Degree qualified Production Manager with a track record of delivering sustainable results ion an electro-mechanical assembly or related manufacturing environment. Lean Manufacturing / continuous improvement experience and proven management expertise essential.
Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

From £25,000 to £31,000 per year

Location

Hertfordshire

Job term

Permanent

Job hours

Full time

Production Team Leader

Hertfordshire

circa £24-30,000 + Benefits

Working within our design, development and manufacturing facility a position has arisen for an experienced Production / Cell Team Leader to undertake a key, lean and New Product (NPI) biased role as a result of strong sales.

The role of Team Leader will be to support the manufacture of our products with key accountability for management of a team of skilled operators / technicians to optimise production efficiency and ensure the highest levels of quality.

Working in conjunction with the Production Manager the Production Team Leader will be responsible for scheduling the work for your team and capacity planning to meet deadlines
Supporting the Engineering team on New Product introduction activities (NPI)
Acting as a lean change agent – identifying continuous improvement initiatives and working with the team to implement effectively
Identify areas of training and development / multi-skilling for the staff
Ensuring adherence to quality standards
Working in conjunction with the purchasing / supply chain department to ensure smooth flow of materials onto the shop floor
Representing the Manufacturing team in cross company communications

The ideal candidate will be an experienced Manufacturing / Production Team Leader with several years’ experience leading skilled teams within a busy assembly manufacturing environment. In depth understanding of Lean manufacturing initiatives such as 5S, 8D, poke yoke essential as continuous improvement will be a large focus of the role. Experience of MRP also sought.
Orion Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.

Recruiter

Orion Electrotech

Salary

Competitive

Location

Mansfield

Job term

Permanent

Job hours

Full time

Job Title: Maintenance Manager
Salary: £50,000 to £55,000 per annum
Employment Type: Permanent
Start Date: Immediately
Location: Mansfield

Available is an opportunity to work for a well-established engineering company who due to increased orders are currently going through a growth period and seek an experienced Maintenance Manager to join their highly skilled team.

The Maintenance Manager that is appointed will be responsible for a fast paced team of 20+ staff in a precision aerospace environment. You must have previous aerospace experience and be able to put in place the correct structure needed to help grow this fast paced business.

The Maintenance Manager must have experience of hands on servicing or maintenance with CNC machines and have progressed into a managerial position.

The Maintenance Manager will need to implement correct PPM processes and set individual and team KPI's to ensure the orders make it out on time as with this industry late deliveries incur heavy fines which need to be avoided where possible.

The Maintenance Manager should be strong willed and be able to communicate well with the directors to keep them updated on the progress of the machine shop.

If you are interested in the above position email me at your earliest convenience at [contact details removed] Electrotech Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003.